R.SEALER features
A dependable base for interior repainting.
A low-odour water-based modified acrylic sealer that prepares correctly treated interior cementitious and board surfaces for compatible topcoats.
Key features
- Interior wall preparationDesigned for correctly prepared interior cement plaster, hard or soft boards and gypsum board.
- Improves topcoat adhesionCreates a more dependable base for compatible finishing coats.
- Supports better hidingHelps reduce uneven absorption and supports a more consistent finished appearance.
- Moisture resistanceHelps protect the coating system from moisture-related wall issues.
- Low-odour water-based formulaA low-VOC preparatory coating designed for comfortable interior use.
- Efficient repainting systemSpecified as one sealer coat followed by two compatible topcoats.
R.SEALER product guide
R.SEALER product guide
R.SEALER is a low-odour water-based modified acrylic sealer for correctly prepared interior cementitious and board surfaces, used before compatible finishing coats.
See product specifications
- Available sizes
- 5L and 20L
- Product type
- Interior water-based modified acrylic sealer
- Finish
- White matt preparatory coat
- Recommended system
- 1 sealer coat + 2 compatible topcoats
Common questions about R.SEALER
What is R.SEALER?
R.SEALER is a water-based modified acrylic sealer that prepares correctly treated interior walls for compatible finishing coats.
Where can R.SEALER be used?
It is intended for correctly prepared interior cement plaster, hard or soft boards and gypsum board, including repainting work.
Is R.SEALER a decorative paint colour?
No. It is a white matt preparatory sealer used before compatible topcoats.
What sizes does R.SEALER come in?
The current R.SEALER product is available in 5L and 20L sizes.
How much area can R.SEALER cover?
The technical data sheet lists a theoretical coverage of approximately 12 to 14 square metres per litre, depending on the substrate and application conditions.
How is the R.SEALER system applied?
Prepare a clean, dry and stable surface, apply one undiluted sealer coat by roller, brush or spray, allow the specified overcoating time, then apply two compatible topcoats.