Strong multi-surface adhesion
Designed to improve adhesion on correctly prepared tile, concrete, timber and other compatible surfaces.
Interior + exterior bonding primer
R.BOND Ultra-Bond Anti-Mould Primer
A high-performance primer for damp, humid, chalky or low-adhesion surfaces, designed to stabilise weakened substrates and improve topcoat adhesion.
Use "RP10" for 10% off
From$45
Available in 1L and 5L
Strong adhesion for difficult interior and exterior surfaces
Ultra bondImproves topcoat adhesion
Surface stabilisingBinds chalky and weakened areas
Interior + exteriorVersatile preparation
Anti-mould supportMade for damp conditions
R.BOND primer
One specialist primer for difficult surfaces.
R.BOND is a dedicated preparatory primer rather than a decorative colour coating. Choose the pack size required for the prepared substrate.
View productR.BOND product overview
See where R.BOND fits into the coating system.
Original R.BOND product information covering compatible surfaces, key performance benefits and recommended uses.
Why choose R.BOND
A stronger foundation for the coating system.
Specialist preparation for challenging surfaces, combining deep substrate penetration with dependable adhesion and protective support.
Stabilises weak surfaces
Penetrates chalky, dusty or weakened substrates and forms a low-absorbency preparatory film.
Mould + efflorescence resistance
Helps block mould, efflorescence and recurring surface chalkiness within the coating system.
Interior + exterior use
Suitable for correctly prepared surfaces in interior or exterior settings.
Wet-area preparation
Supports paint, waterproofing membrane and damp-proofing systems in bathrooms, kitchens and other wet areas.
Restricted-substance formula
Listed as free from APEO, formaldehyde, mercury, lead, ammonia and heavy metals.
Application guide
Simple to apply.
Prepare a clean, dry and stable substrate before applying R.BOND as the bonding layer. Follow the current technical sheet for substrate-specific application and drying requirements.
Step 1Prepare
Remove dust, oil, loose material and other contamination from the substrate.
Step 2Apply R.BOND
Apply an even bonding-primer coat to the correctly prepared surface.
Step 3Continue the system
Allow the primer to dry as directed before the selected paint, waterproofing membrane or damp-proofing topcoat.
Ready to prepare a difficult surface?
Choose the R.BOND pack size required for your primer and adhesion system.